|
Mikrotik Groove A-5Hn
 The
Groove is our smallest outdoor series model - a fully featured RouterBOARD
powered by RouterOS. Weatherproof, durable and ready to use. It has
one 10/100 Ethernet port with PoE support and a built-in 200mW 802.11a/n
wireless radio. With the Nv2 TDMA technology, 125Mbit aggregate throughput
is possible!
The Groove features pole mounting points, so attaching to masts and
round poles is really easy with a simple mounting loop.
It comes with L4 license, so you can attach your favorite 5Ghz antennna
to use it as an AP, to make wireless point-to-point links or as a CPE-
whatever you prefer!
It has a built-in N-male connector, so you can attach it to an antenna
directly, or use a standard antenna cable. LED signal indicators make
it easy to install and align.
Box contains: Groove A-5Hn unit, mounting loops, PoE injector, power
adapter
| Details |
|---|
| Product code | RBGrooveA5Hn | | CPU speed | 400MHz | | RAM | 64MB | | Architecture | MIPS-BE | | LAN ports | 1 | | Gigabit | 0 | | MiniPCI | 0 | | miniPCI-e | 0 | | Integrated Wireless | 1 | | Wireless standards | 802.11 a/n | | USB | 0 | | Memory Cards | 0 | | Power Jack | 0 | | 802.3af support | 0 | | PoE | 9-30V | | Voltage Monitor | Yes | | CPU temperature monitor | No | | PCB temperature monitor | No | | Dimensions | 177x44x44mm, 193g | | Operating System | RouterOS v5 and above | | Temperature range | -30C to +70C | | RouterOS License | Level4 | | Current Monitor | No | | TX power | 23dBm |
Performance test results| RBGrooveA5Hn | One Fast Ethernet port test (400Mhz) | RouterOS v6.0rc6 | | | Mode | Configuration | 64 byte | 512 byte | 1518 byte | | kpps | Mbps | kpps | Mbps | kpps | Mbps | | Bridging | fast path | 148.0 | 97.1 | 23.5 | 99.6 | 8.1 | 99.8 | | Bridging | 25 Bridge filter rules | 53.7 | 35.2 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | fast path | 148.0 | 97.1 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | 25 Simple Queues | 92.8 | 60.8 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | 25 Firewall filter rules | 37.5 | 24.6 | 23.5 | 99.6 | 8.1 | 99.8 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
|
