|
Mikrotik Groove A-2Hn-32
 The
GrooveA-2Hn-32 is our smallest outdoor series model - a fully featured
RouterBOARD powered by RouterOS. Weatherproof, durable and ready to
use. It has one 10/100 Ethernet port with PoE support and a built-in
630mW 802.11b/g/n wireless radio. With the Nv2 TDMA technology, 125Mbit
aggregate throughput is possible, limited only by the ethernet port!
It comes with L4 license, so you can attach your favorite 2.4Ghz antennna
to use it as an AP, to make wireless point-to-point links or as a CPE-
whatever you prefer!
It has a built-in N-male connector, so you can attach it to an antenna
directly, or use a standard antenna cable. LED signal indicators make
it easy to install and align.
Package contains Groove A-2Hn-32 unit, mounting loops, PoE injector,
24V power adapter
| Details |
|---|
| Product code | RBGrooveA2Hn | | CPU speed | 400MHz | | RAM | 32MB | | Architecture | MIPS-BE | | LAN ports | 1 | | Gigabit | No | | MiniPCI | 0 | | Integrated Wireless | Yes | | Wireless standards | 802.11b/g/n | | PoE | 8-28V DC on Ether1 | | Voltage Monitor | No | | PCB temperature monitor | No | | CPU temperature monitor | No | | Dimensions | 177x44x44mm | | Operating System | RouterOS | | Temperature range | -30C to +70C | | RouterOS License | L4 | | TX power | 28dBm | | CPU | AR7241 | | Max Power consumption | 5W |
Performance test results| RBGrooveA2Hn | One Fast Ethernet port test (400Mhz) | RouterOS v6.0rc6 | | | Mode | Configuration | 64 byte | 512 byte | 1518 byte | | kpps | Mbps | kpps | Mbps | kpps | Mbps | | Bridging | fast path | 148.0 | 97.1 | 23.5 | 99.6 | 8.1 | 99.8 | | Bridging | 25 Bridge filter rules | 53.7 | 35.2 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | fast path | 148.0 | 97.1 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | 25 Simple Queues | 92.8 | 60.8 | 23.5 | 99.6 | 8.1 | 99.8 | | Routing | 25 Firewall filter rules | 37.5 | 24.6 | 23.5 | 99.6 | 8.1 | 99.8 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
|
