is a weatherproof outdoor AP with dual-polarized omni antennas - the
perfect companion for our SXT, or for any other 5GHz 802.11a/n standard
Weatherproof, durable and ready to use. It has five 10/100 Ethernet
ports, PoE support and a built-in 400mW 802.11a/n wireless radio. It
supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customisable, show Ethernet
activity or wireless signal - or any other information from RouterOS.
The USB port gives the ability to connect a 3G modem or a storage drive.
The OmniTIK UPA also features power output on it’s ethernet ports.
Ports 2-5 can power other PoE capable devices (like SXT-5HPnD) with
the same voltage as applied to the unit. Less power adapters to worry
Box contains: OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A
|PoE||8-30V, Supports PoE output on ports 2-5. Max current 500mA per port|
|CPU temperature monitor||No|
|PCB temperature monitor||No|
|Temperature range||-30 .. +70C|
|RouterOS License||Level 4|
Performance test results
|RBOMNITIKUPA-5HnD||Five Fast Ethernet port test (400Mhz)||RouterOS v6.0rc6|
|Mode||Configuration||64 byte||512 byte||1518 byte|
|Bridging||25 Bridge filter rules||53.7||35.2||52.3||221.9||40.3||495.2|
|Routing||25 Simple Queues||92.8||60.8||88.5||375.1||40.3||495.2|
|Routing||25 Firewall filter rules||37.5||24.6||38.4||162.6||37.6||462.4|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results